Qtx LED Par Bar PB-7

The Maxi Bar houses 432 Ultra bright 10mm LEDs split between blue, green and red. When used in combination, these can produce pretty much any colour, including white. Overall, the power consumption is a nominal 64W.

The system has full DMX control and can be set to any one of 15 DMX channels although it is likely that most users will rely on the footswitches and the automatic modes. If more lighting bars are required, they can be connected in master/slave fashion using standard XLR cables. The footswitch unit is gratifyingly robust, with a folded steel case and very substantial switches. There are four switches in all, which are labelled: Preset, Sound, Hold and Blackout. Preset mode steps through nine options, which comprise of seven static colour choices, an automatic colour change, or a morph between colours. When Sound is activated, the unit is triggered from a microphone built into the T-bar, which has its own sensitivity control. In this mode the system steps through a series of built-in chases with some involving individual arrays being switched on and off, and others involving all the arrays in a colour change sequence. Hold freezes the current lighting state, whereas Blackout kills all the lamps.

Features:

DMX channels: 2, 3, 4, 7, 8, 14, and 15 selectable
LEDs: 432 Ultra Bright 10mm LEDs (R: 144, G: 144, B: 144)
Individual tilt & swivel on each panel
Beam angle: 30 degrees
3-Pin XLR In/Out sockets for DMX
1/4" jack foot switch socket
Slimline design
DMX 512 compatible
Linkable – connect multiple kits to one controller
Height adjustable stand
All metal design
Ultra low heat output
No duty cycle

Specifications:

Power supply: 240V
Power consumption: 64W
Dimensions: 1280 x 380 x 135mm
Weight: 13Kgs